|
|
xxx
|
Battery > Mod Packs
MODULAR PACKS
Mod Packs offer an inexpensive alternative to expensive injection molds. The MP Series of Modular Pak batteries is designed to permit fabrication of many different batteries in a rigid cell housing, providing good insulation, appearance, flexibility and packaging at minimum cost. Each cell is housed in its own pocket, completely insulated from adjoining cells, and the ventilated case allows convective air currents to flow vertically and horizontally over the cells to promote longer life. Mod Pak batteries are standard in 6, 12, 24, and 28.8 volt configurations, and are available with wire leads or thumb-nut screw terminals. Other configurations, voltages, and terminations are available on special request. AVEX application engineering is available for your assistance.
| Modal |
Nominal Voltage |
Nominal Capacity (Ah) |
Length in. |
Width in. |
Height* in. |
Weight
oz. |
| MP201 |
6 |
0.66 |
3.473 |
0.704 |
2.31 |
5.8 |
| MP202 |
12 |
0.66 |
3.473 |
1.408 |
2.31 |
11.6 |
| MP203 |
12 |
0.66 |
6.945 |
0.704 |
2.31 |
11.6 |
| MP205 |
24 |
0.66 |
3.473 |
2.816 |
2.31 |
23.2 |
| MP207 |
24 |
0.6 |
6.945 |
1.408 |
2.31 |
23.2 |
| MP208 |
28.8 |
0.66 |
3.507 |
3.508 |
2.31 |
28 |
| MP401 |
6 |
1.4 |
5.05 |
1.03 |
2.06 |
10.4 |
| MP402 |
12 |
1.4 |
5.05 |
2.06 |
2.06 |
20.7 |
| MP403 |
12 |
1.4 |
10 |
1.03 |
2.06 |
20.7 |
| MP405 |
24 |
1.4 |
5.05 |
4.1 |
2.06 |
41.4 |
| MP407 |
24 |
1.4 |
10 |
2.06 |
2.06 |
41.4 |
| MP408 |
28.8 |
1.4 |
5.05 |
5.12 |
2.06 |
50 |
| MP701 |
6 |
4.5 |
7.09 |
1.44 |
2.78 |
29.1 |
| MP702 |
12 |
4.5 |
7.09 |
2.88 |
2.78 |
57.9 |
| MP703 |
12 |
4.5 |
14.18 |
1.44 |
2.78 |
57.9 |
| MP705 |
24 |
4.5 |
7.09 |
5.76 |
2.78 |
115 |
| MP707 |
24 |
4.5 |
14.18 |
2.88 |
2.78 |
115 |
| MP708 |
28.8 |
4.5 |
7.09 |
7.2 |
2.78 |
140 |
| MP801 |
6 |
7 |
7.09 |
1.44 |
3.942 |
46.4 |
| MP802 |
12 |
7 |
7.09 |
2.88 |
3.942 |
92.5 |
| MP803 |
12 |
7 |
14.18 |
1.44 |
3.942 |
92.5 |
| MP805 |
24 |
7 |
7.09 |
5.76 |
3.942 |
184.2 |
| MP807 |
24 |
7 |
14.18 |
2.88 |
3.942 |
184.2 |
| MP808 |
28.8 |
7 |
7.09 |
7.2 |
3.942 |
1230 |
General Information
• Voltages and configurations other than standards are available. Voltages are 1.2 increments.
• Screw terminals are standard from stock. If wire leads are required, please specify when ordering.
The addition of a T for terminals, or W for wire leads, at the end of the battery type indicates preference.
EXAMPLE: MP402-T is 12 volt, 1.4 AH, with screw terminals.
MP402-W is 12 volt, 1.2 AH with standard wire leads.
• Wire leads are color coded black for negative, red for positive.
Standard wire lead sizes:
MP200 Series 20AWG, stranded, 12 inch (304.8mm)
MP400-700 Series 18 AWG, stranded, 12 inch (304.8mm)
MP800 Series 18AWG, stranded, 12 inch (304.8mm)
• Thumb-Nuts have (+,-) polarity markings next to each terminal.
When ordering screw terminals, ADD .406 inches (10.31mm) to battery total height.
Standard Mod Pack Configurations
|
